Raspberry Pi 的山寨升级版 CubieBoard
OpenBSD/beagle FTP上木有现成的，难道要自己从CVS下载代码构建？这个俺不会啊…hyaska 写了: 玩OB要入BeagleBoard或PandaBoard，用的是TI的芯片。
代码: 全选
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r245446M: Tue Jan 15 12:53:26 SGT 2013
root@fbsd10:/usr/obj/arm.armv6/usr/src/sys/BSD-PI arm
CPU: ARM1176JZ-S rev 7 (ARM11J core)
Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
WB enabled LABT branch prediction enabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 536870912 (512 MB)
avail memory = 451592192 (430 MB)
kbd0 at kbdmux0
simplebus0: <Flattened device tree simple bus> mem 0xf2000000-0xf2ffffff on fdtbus0
intc0: <BCM2835 Interrupt Controller> mem 0xf200b200-0xf200b3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0xf2003000-0xf2003fff irq 8,9,10,11 on simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0xf2300000-0xf23000ff irq 70 on simplebus0
bcm_sdhci_attach(): SDHCI frequency: 100MHz
mmc0: <MMC/SD bus> on sdhci_bcm0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xf200b880-0xf200b8bf irq 1 on simplebus0
mbox0: [GIANT-LOCKED]
bcmwd0: <BCM2708/2835 Watchdog> mem 0xf210001c-0xf2100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0xf2200000-0xf22000af irq 57,59,58,60 on simplebus0
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0xf2201000-0xf2201fff irq 65 on simplebus0
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xf2980000-0xf299ffff irq 17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 framebuffer device> on fdtbus0
sc0: Unknown <16 virtual consoles, flags=0x300>
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 3776MB <SDHC SA04G 0.4 SN XXXXXXXXXX MFG 06/2010 by 2 TM> at mmc0 25.0MHz/4bit/65535-block
fb0: 1680x1050(0x0@0,0) 16bpp
fb0: pitch 3360, base 0x5d385000, screen_size 3548160
Root mount waiting for: usbus0
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 3 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: XX:XX:XX:XX:XX:XX
Root mount waiting for: usbus0
ugen0.4: <MLK> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd1 at ukbd0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
warning: no time-of-day clock registered, system time will not be set accurately
smsc0: chip 0xec00, rev. 0002代码: 全选
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #27 r245250:245455M: Wed Jan 16 09:42:54 ULAT 2013
[email protected]:/usr/obj/arm.armv6/usr/src/sys/CUBIEBOARD arm
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 1073741824 (1024 MB)
avail memory = 1042694144 (994 MB) 我在freebsd官方论坛也这么回了一个帖子，有关开发者回复说：unreal 写了: 可见 ARM v7 的Cortex-A8 还是在跑 ARMv6 指令集，不支持浮点协处理器。
This line tells you it is an ARMv7.代码: 全选
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
The arm.armv6 in the kernel directory is because the ARMv6 and ARMv7 cores are close enough that they share a large amount of code and are considered the same architecture from FreeBSD's point of view. Floating point support is being worked on but a few toolchain issues need to be fixed first.
看起来确实好便宜啊，可惜OpenBSD不支持unreal 写了:http://cubieboard.org/2013/06/19/cubieboard2-is-here/
Below is the full specification of cubieboard2:
● CPU ARM® Cortex™-A7 Dual-Core
● GPU ARM® Mali400MP2, Complies with OpenGL ES 2.0/1.1
● Memory 1GB DDR3 @960M
● Storage 4GB internal NAND flash, up to 64GB on uSD slot, up to 2T on 2.5 SATA disk
● Power 5VDC input 2A or USB otg input
● Networking 10/100 ethernet, optional wifi
● USB Two USB 2.0 HOST, one USB 2.0 OTG
● Other One IR
● Extended Interfaces 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more
目前taobao最低￥365。同时1代普遍降至￥299。
FreeBSD支持阿，OB的话，可以在ARM的邮件列表里面问问，俺E文盲 没敢问……f5b 写了: 看起来确实好便宜啊，可惜OpenBSD不支持
还有这么丰富的接口，比较起来beaglebone black 好贵啊
不过话说回来，丰富接口功能多，如果做桌面系统，性能可能也跟不上。还不如买个x86的二手瘦客户机。
看配置CubieBoard 跑OB好些，接口丰富，有satalivemoon 写了:CubieBoard2和pcDuino哪个跑OB好呢
想买个试试看，想用ob跑pf代替路由器防火墙和web，不知道各位有什么推荐的板子吗f5b 写了:看配置CubieBoard 跑OB好些，接口丰富，有satalivemoon 写了:CubieBoard2和pcDuino哪个跑OB好呢
正浏览此版面之用户: 没有注册用户 和 0 访客