openbsd安装xmonad窗口管理器不能启动

[junfengfan]

openbsd安装xmonad窗口管理器不能启动，用　xmonad 命令也不能启动到桌面，
# more /home/xmonad
Adding xmonad-0.10:gmp-5.0.2p0
Adding xmonad-0.10
Adding xmonad-lib-0.10:ghc-7.0.4p3
Adding xmonad-lib-0.10:hs-syb-0.3.3
Adding xmonad-lib-0.10:hs-transformers-0.2.2.0p0
Adding xmonad-lib-0.10:hs-mtl-2.0.1.0p0
Adding xmonad-lib-0.10:hs-X11-1.5.0.0p8
Adding xmonad-lib-0.10
Adding hs-xmonad-contrib-0.10:hs-X11-xft-0.3p4
Adding hs-xmonad-contrib-0.10
--- +xmonad-0.10 -------------------
For a configurable xmonad (using ~/.xmonad/xmonad.hs　), you should
also install the xmonad-lib package. For even more fun (like the
spiral layout), you may want to install the hs-xmonad-contrib
package.
照上面提示：~/.xmonad/xmonad.hs　也建立了　xmonad文件夹，也把xmonad.hs复制到　此目录下，还是不能启动到桌面



对openbsd我是东一樃头西一榔头，没有学习重点……

[hyaska]

没用过xmonad，用过awesome 和 i3 ，都能启动到桌面，但是i3玩不转，适合定义好布局，一启动就能进入工作状态

[碧落星河]

不了解xmonad，主要把OB当桌面来用，目前用KDE桌面环境，很不错。

[sw2wolf]

xmonad.hs需要先编译才能用

[junfengfan]

xmonad.hs需要先编译才能用

如何编译，还是请你写出来

[sw2wolf]

如何编译，还是请你写出来

好像是`xmonad --recompile`, 好外没用了， 你查查看.

[junfengfan]

好像是`xmonad --recompile`, 好外没用了， 你查查看.

#xmonad --recompile xmonad.hs
不行，出现：
xmonad: user error (unrecognized flags)

[sw2wolf]

#xmonad --recompile xmonad.hs
不行，出现：
xmonad: user error (unrecognized flags)

去掉xmonad.hs， 直接`xmonad --recompile", 当然，xmonad.hs须在~/.xmonad里

[junfengfan]

# xmonad --recompile
Error detected while loading xmonad configuration file: /root/.xmonad/xmonad.hs
collect2: ld terminated with signal 11 [Segmentation fault]

Please check the file for errors.

# Error: Can't open display:

是不是需要对xmonad.hs这个文件修改？怎么改？

[junfengfan]

#/usr/local/share/doc/hs-xmonad-0.10

下面有　CONFIG 　xmonad.hs两个文件，

# more CONFIG
== Configuring xmonad ==

xmonad is configured by creating and editing the file:

~/.xmonad/xmonad.hs

xmonad then uses settings from this file as arguments to the window manager,
on startup. For a complete example of possible settings, see the file:

man/xmonad.hs

Further examples are on the website, wiki and extension documentation.

http://haskell.org/haskellwiki/Xmonad

== A simple example ==

Here is a basic example, which overrides the default border width,
default terminal, and some colours. This text goes in the file
$HOME/.xmonad/xmonad.hs :

import XMonad

main = xmonad $ defaultConfig
{ borderWidth = 2
, terminal = "urxvt"
, normalBorderColor = "#cccccc"
, focusedBorderColor = "#cd8b00" }

You can find the defaults in the file:

XMonad/Config.hs

== Checking your xmonad.hs is correct ==

Place this text in ~/.xmonad/xmonad.hs, and then check that it is
syntactically and type correct by loading it in the Haskell
interpreter:

$ ghci ~/.xmonad/xmonad.hs
GHCi, version 6.8.1: http://www.haskell.org/ghc/ :? for help
Loading package base ... linking ... done.
Ok, modules loaded: Main.

Prelude Main> :t main
main :: IO ()

Ok, looks good.

== Loading your configuration ==

To have xmonad start using your settings, type 'mod-q'. xmonad will
then load this new file, and run it. If it is unable to, the defaults
are used.

To load successfully, both 'xmonad' and 'ghc' must be in your $PATH
environment variable. If GHC isn't in your path, for some reason, you
can compile the xmonad.hs file yourself:

$ cd ~/.xmonad
$ ghc --make xmonad.hs
$ ls
xmonad xmonad.hi xmonad.hs xmonad.o

When you hit mod-q　　（？是什么意思？）, this newly compiled xmonad will be used.

== Where are the defaults? ==

The default configuration values are defined in the source file:

XMonad/Config.hs

the XConfig data structure itself is defined in:

XMonad/Core.hs

== Extensions ==

Since the xmonad.hs file is just another Haskell module, you may import
and use any Haskell code or libraries you wish. For example, you can use
things from the xmonad-contrib library, or other code you write
yourself.


在openbsd5.1照上面做，还是启动不了桌面

[sw2wolf]

你用`xmonad --recompile`编译， 然后在~/.xinit中加上exec xmonad试试！ 附件是以前用的。

[junfengfan]

成功了，但为何只有一个桌面？看起来很酷；alt +2 切换到第二个桌面，依次类推





登入後你會看到整個螢幕甚麼東沒有
別懷疑是否安裝發生問題
你現在已經登入成功 而且已經在用 XMonad 了
不信的話 可以試試
Alt-Shift-Enter
這時會出現一個Terminal

多開幾個terminal吧
然後試試下面的功能

Alt-Space : 切換視窗的layout方式
Alt-j : focus上方的視窗
Alt-k : focus下方的視窗
Alt-h : 縮小focus的視窗
Alt-l : 放大focus的視窗
Alt-p :
Alt-Shift-2: 把現在focus的視窗丟到workspace 2